聯系我們/CONTACT US
聯系人：何小姐
電 話：0574-27976112,0574-27975197
手 機：18157427375
地 址：寧波市江北區慈城鎮張嘉路91弄9號三樓
郵 編：
傳 真：0574-87460769
郵 箱：18157427375@163.com
阿儀網商鋪：http://www.app17.com/c101739/
手機網站：m.zjrooko.com
產品分類/CLASS
公司新聞/NEWS
粉體流變儀產品需求旺盛寧波瑞柯品牌保質保量
閱讀次數：1772 發布時間：2020/10/27 9:53:34
粉體流變儀產品需求旺盛寧波瑞柯品牌保質保量,粉體物性測試儀,粉體流動分析儀,粉體綜合特性測試儀,粉體特性測試儀
（http://www.app17.com/c101739/products/d9403191.html）
一、FT-3400型粉體流變儀適用范圍Scope of application：
FT-3400型粉體流變儀適用于化工、陶瓷加工、食品、化妝品、顏料.制藥、金屬粉末、石墨粉、塑料、橡膠、混泥土、農業、料斗設計等粉體散粒物料領域質量管控和研究,常用于生產加工企業研發部門、科研院所、大中專院校、實驗室使用。
Applicable to: chemical, ceramic processing, food, cosmetics, pigments, pharmaceuticals, metal powder, graphite powder, plastics, rubber, concrete, agriculture, hopper design, etc. Quality control ａnd research in the field of powder materials, often used in production ａnd processing enterprises R & D departments, research institutes, colleges ａnd universities, laboratories.
二、FT-3400型粉體流變儀參考標準Guideline：
參照ASTM_D6128-97；ASTM D6682-2008；ASTM_D6773-2008;GB/T31057.3-2018附錄B;Jenike方法分析粉體流動行為表征特性。
Refer to ASTM_D6128-97; ASTM D6682-2008; ASTM_D6773-2008; GB/T31057.3-2018 Appendix B; Jenike method for characterizing powder flow behavior
三、FT-3400型粉體流變儀功能描述Functional description：
通過分析粉體剪切動態數據來描述流動行為表征，粉體工業在加工、存儲、運輸、料倉中常出現拱架/鼠孔結構；物料之間及物料與固體壁面的摩擦；在料斗的設計中，排料口的大小、料斗壁的傾斜角以及粉料對料斗壁的壓力，設計不合理的料斗會給生產造成很大的困難；這些影響粉體流動性的行為特征通過測量粉體內部強度、流動函數、摩擦函數、密度、時間函數等數據分析上述現象和狀態，采用PC軟件建立數據模型實時分析。
The flow behavior characterization is described by analyzing the powder shear dynamic data. The powder industry often has arch/rat hole structure in processing, storage, transportation ａnd silo; friction between materials ａnd materials ａnd solid wall; in hopper design In the middle, the size of the discharge opening, the inclination angle of the hopper wall, ａnd the pressure of the powder on the hopper wall, the irrationally designed hopper will cause great difficulty in production; these behavioral characteristics affecting the fluidity of the powder are measured by measuring the inside of the powder. Strength, flow function, friction function, density, time function ａnd other data analysis of the above phenomena ａnd states. Real-time analysis of data models using PC software.
四、FT-3400型粉體流變儀功能項目Test items：
預固結處理；瞬態剪切函數；時效剪切函數；壁摩擦函數；時效壁摩擦函數 ；松裝密度函數 ；數據管理與分析；系統管理。
Pre-consolidation treatment; transient shear function; aging shear function; wall friction function; aging wall friction function; loose density function; data management ａnd analysis;
五、FT-3400型粉體流變儀工作原理working principle：
通過自動控制的荷重施加于剪切蓋上；并作用于已知速度轉動的環形剪切盒內樣品上，從而實現樣品與樣品在不同壓力下流動。
It is applied to the shear cap by an automatically controlled load; ａnd acts on the sample in the annular shear box which is rotated at a known speed, so that the sample ａnd the sample flow under different pressures.
六、FT-3400型粉體流變儀測試和分析數據Test ａnd analyze data：
分析和測試如下數據：莫爾應力圓、內摩擦角、主應力、剪切力、屈服軌跡、穩態流、流動函數、開放屈服強度（無側限屈服強度）、內摩擦?xí)r間角、時效屈服軌跡、堆積密度、密度軌跡、壁摩擦角、附著力、壁剪切力、壁應力、壁軌跡、運動摩擦角、靜態摩擦角、料倉設計的料斗半頂角、卸料口徑、流與不流判定、流動因子、初始抗剪強度（內聚力）等數據分析。
Analyze ａnd test the following data: Mohr stress circle, internal friction angle, principal stress, shear force, yield trajectory, steady flow, flow function, open yield strength (unlimited yield strength), internal friction time angle, aging yielding Trajectory, bulk density, density trajectory, wall friction angle, adhesion, wall shear force, wall stress, wall trajectory, motion friction angle, static friction angle, hopper half apex angle of the silo design, discharge diameter, flow ａnd no Data analysis, flow factor, initial shear strength (cohesion) ａnd other data analysis.
七：FT-3400型粉體流變儀參數資料Technical indicators：
http://www.app17.com/c101739/products/d8900399.html
（http://www.app17.com/c101739/products/d9403191.html）
一、FT-3400型粉體流變儀適用范圍Scope of application：
FT-3400型粉體流變儀適用于化工、陶瓷加工、食品、化妝品、顏料.制藥、金屬粉末、石墨粉、塑料、橡膠、混泥土、農業、料斗設計等粉體散粒物料領域質量管控和研究,常用于生產加工企業研發部門、科研院所、大中專院校、實驗室使用。
Applicable to: chemical, ceramic processing, food, cosmetics, pigments, pharmaceuticals, metal powder, graphite powder, plastics, rubber, concrete, agriculture, hopper design, etc. Quality control ａnd research in the field of powder materials, often used in production ａnd processing enterprises R & D departments, research institutes, colleges ａnd universities, laboratories.
二、FT-3400型粉體流變儀參考標準Guideline：
參照ASTM_D6128-97；ASTM D6682-2008；ASTM_D6773-2008;GB/T31057.3-2018附錄B;Jenike方法分析粉體流動行為表征特性。
Refer to ASTM_D6128-97; ASTM D6682-2008; ASTM_D6773-2008; GB/T31057.3-2018 Appendix B; Jenike method for characterizing powder flow behavior
三、FT-3400型粉體流變儀功能描述Functional description：
通過分析粉體剪切動態數據來描述流動行為表征，粉體工業在加工、存儲、運輸、料倉中常出現拱架/鼠孔結構；物料之間及物料與固體壁面的摩擦；在料斗的設計中，排料口的大小、料斗壁的傾斜角以及粉料對料斗壁的壓力，設計不合理的料斗會給生產造成很大的困難；這些影響粉體流動性的行為特征通過測量粉體內部強度、流動函數、摩擦函數、密度、時間函數等數據分析上述現象和狀態，采用PC軟件建立數據模型實時分析。
The flow behavior characterization is described by analyzing the powder shear dynamic data. The powder industry often has arch/rat hole structure in processing, storage, transportation ａnd silo; friction between materials ａnd materials ａnd solid wall; in hopper design In the middle, the size of the discharge opening, the inclination angle of the hopper wall, ａnd the pressure of the powder on the hopper wall, the irrationally designed hopper will cause great difficulty in production; these behavioral characteristics affecting the fluidity of the powder are measured by measuring the inside of the powder. Strength, flow function, friction function, density, time function ａnd other data analysis of the above phenomena ａnd states. Real-time analysis of data models using PC software.
四、FT-3400型粉體流變儀功能項目Test items：
預固結處理；瞬態剪切函數；時效剪切函數；壁摩擦函數；時效壁摩擦函數 ；松裝密度函數 ；數據管理與分析；系統管理。
Pre-consolidation treatment; transient shear function; aging shear function; wall friction function; aging wall friction function; loose density function; data management ａnd analysis;
五、FT-3400型粉體流變儀工作原理working principle：
通過自動控制的荷重施加于剪切蓋上；并作用于已知速度轉動的環形剪切盒內樣品上，從而實現樣品與樣品在不同壓力下流動。
It is applied to the shear cap by an automatically controlled load; ａnd acts on the sample in the annular shear box which is rotated at a known speed, so that the sample ａnd the sample flow under different pressures.
六、FT-3400型粉體流變儀測試和分析數據Test ａnd analyze data：
分析和測試如下數據：莫爾應力圓、內摩擦角、主應力、剪切力、屈服軌跡、穩態流、流動函數、開放屈服強度（無側限屈服強度）、內摩擦?xí)r間角、時效屈服軌跡、堆積密度、密度軌跡、壁摩擦角、附著力、壁剪切力、壁應力、壁軌跡、運動摩擦角、靜態摩擦角、料倉設計的料斗半頂角、卸料口徑、流與不流判定、流動因子、初始抗剪強度（內聚力）等數據分析。
Analyze ａnd test the following data: Mohr stress circle, internal friction angle, principal stress, shear force, yield trajectory, steady flow, flow function, open yield strength (unlimited yield strength), internal friction time angle, aging yielding Trajectory, bulk density, density trajectory, wall friction angle, adhesion, wall shear force, wall stress, wall trajectory, motion friction angle, static friction angle, hopper half apex angle of the silo design, discharge diameter, flow ａnd no Data analysis, flow factor, initial shear strength (cohesion) ａnd other data analysis.
七：FT-3400型粉體流變儀參數資料Technical indicators：
http://www.app17.com/c101739/products/d8900399.html
ICP備案號：
浙公網安備：
業務2
業務4